Skip to content

Stopwatch

Stopwatch with laps, splits and a big display.

MIN

00:00.00

Lap times appear here. The fastest and slowest are marked once you have two laps.

Space starts and stops, L records a lap, R resets. Nothing is sent or saved; laps vanish when you close the tab.

How an online stopwatch measures time

An online stopwatch records the moment you press Start and, every time the screen redraws, subtracts that moment from the current time. The dial and the digits above are two views of that one number. Stop it and the page keeps the total so far; press Start again and it adds the new stretch to the old one.

The clock it reads is performance.now(), the browser's high-resolution timer, which counts milliseconds from a fixed starting point and does not jump if the computer's clock is adjusted. According to MDN, its resolution is 100 microseconds in an ordinary web page. The screen shows hundredths of a second, which is as fine as a thumb on a button can use.

Sweep hand One turn = 60 seconds Minute register Moves on each minute Rim dot Where the hand was at a lap
Reading the dial. The small register works like the minute counter on a chronograph watch.

Browsers slow down the page's own timers when a tab is hidden, and the MDN notes on timeouts describe those limits. They do not affect this stopwatch's total, because the total is a subtraction between two clock readings and not a count of ticks. A hidden tab simply redraws less often.

Lap time or split time: what is the difference?

A lap time is how long one lap took, from the previous press to this one. A split time is the stopwatch reading at the moment you pressed: the total since the start. Each split is the running sum of the lap times before it. The table shows four presses on one run, with the fastest and slowest laps marked the way the page marks them.

Example: four laps on one run
PressLap timeSplitMarked
Lap 1 00:31.42 00:31.42
Lap 2 00:29.73 01:01.15
Lap 3 00:34.72 01:35.87 Slowest
Lap 4 00:27.53 02:03.40 Fastest

Source: Illustrative figures computed by this page's lap function.

The last split is the total time for the run, and the lap times add up to it. Spreadsheets and training logs usually want lap times; races and lecture timings usually care about splits.

When nothing is marked

One lap has nothing to be compared with, so no label appears. If every lap is exactly the same, there is no fastest or slowest either. From two laps that differ, the shortest is marked fastest and the longest slowest.

Keyboard shortcuts

The shortcuts work anywhere on the page unless a text box has focus. They let you keep your eyes on what you are timing and a thumb on the space bar.

Keys
KeyActionWorks when
Space Start, or stop if running Always
L Record a lap The stopwatch is running
R Reset to 00:00.00 and clear laps The stopwatch is stopped

Exporting laps to a spreadsheet

Export CSV downloads a plain text file that opens in Excel, Google Sheets or Numbers. The file is made inside your browser and is not uploaded. Times appear twice, once readable and once in raw milliseconds, so a spreadsheet can add or average them without parsing text.

Columns in the CSV file
ColumnHoldsExample
lap Lap number, 1 first 2
lap_time, split_time Readable h:mm:ss.cc 0:00:29.73
lap_ms, split_ms Milliseconds, for formulas 29730
note fastest or slowest, else empty fastest

How accurate is an online stopwatch?

The clock is far finer than you are. What limits accuracy is everything around it: the display refreshes in steps of about 16.7 milliseconds on a 60 Hz screen, a mouse or touchscreen adds its own delay, and a human reaction to a starting signal is typically a couple of hundred milliseconds. Those delays are similar at the start and the end of a run, so they mostly cancel out when you time one interval. Comparing laps from one session is more reliable than comparing your reading against someone else's device. For a countdown to a fixed length, use the online timer.

Switching tabs is fine. Putting the computer to sleep during a run is not: what a browser's clock does while a machine sleeps differs between systems, so keep the device awake until you press Stop.

Tips

  • Press Lap at a landmark, such as a track's finish line or the end of a slide, and not at a guess about when a lap should end.
  • Laps are recorded at the press, so a late press makes one lap long and the next one short by the same amount.
  • For a long session, export the CSV before closing the tab; nothing is saved.
  • Use Reset only when stopped. This keeps a stray key from wiping a run in progress.

Common questions

Can I leave the stopwatch running in another tab?

Yes. It stores a start time, so when you return the readout is correct. The page title also shows the elapsed time while it runs, so you can see it from the tab bar.

How many laps can I record?

As many as you press. The list scrolls, newest first, and the CSV contains every lap. To turn lap times from a run into a pace per mile or kilometer, paste the numbers into our running pace calculator.

Does it store my times?

No. Laps exist only in this tab and are gone when you close or reload it, so export first if you need them. The site counts page views, but your times are not sent. To add up exported laps or convert minutes to decimal hours, use the time calculator.

Why do the last two digits flicker?

They are hundredths of a second, redrawn on every screen refresh. That is expected.

Sources

Last reviewed November 9, 2026. For general timing; not certified for official sports timing.

Related tools