Skip to content

Running pace calculator

Pace, time and distance, with race splits.

Find
Units
Race distance
/km
h:m:s
km

Finish time

55:00

10 km at 5:30 per km

Pace per km
–
Pace per mile
–
Speed, km/h
–
Speed, mph
–
Your pace on the track

Four lanes on one speed scale. The marathon records are the fastest official marks over 42.195 km; the walking band spans the group averages in one large review. The table shows how long your distance would take at each pace.

At this paceYour distance400 m lap

Splits per km

KmSplitPaceTotal

Estimates only; race-day conditions change real times. For information only; not medical advice.

Built and maintained by Sam Jakola, editor · Sources and how we check · Corrections · Last reviewed

How is running pace calculated?

Running pace is your time divided by your distance, written as minutes and seconds per kilometer or per mile. Run 10 km in 55 minutes and your pace is 5:30 per km. This pace calculator solves whichever of the three numbers you leave out: pace, time or distance. Give it any two and it returns the third, then lays out the splits for the whole route.

The three formulas

Pace

= timedistance

Time

= pace × distance

Distance

= timepace

Worked example: a 1 hour 45 minute 30 second half marathon. 6,330 seconds ÷ 21.0975 km = 300.0 seconds per km, or 5:00 per km. In miles it is 5:00 × 1.609344 = 8:03 per mile.

Pace by finish time

The tables list the pace you need for common goal times. The last column of the 5K table is a rough 10K time from a formula described further down, so read it as an estimate rather than a promise.

5K: finish time and pace
5K timePer kmPer milekm/hEst. 10K
20:00 4:00 6:26 15.0 41:42
22:30 4:30 7:15 13.3 46:55
25:00 5:00 8:03 12.0 52:07
27:30 5:30 8:51 10.9 57:20
30:00 6:00 9:39 10.0 1:02:33
35:00 7:00 11:16 8.6 1:12:58
40:00 8:00 12:52 7.5 1:23:24

Source: calculated here from 5 km; the last column uses the Riegel estimate.

10K: finish time and pace
10K timePer kmPer milekm/h
40:00 4:00 6:26 15.0
45:00 4:30 7:15 13.3
50:00 5:00 8:03 12.0
55:00 5:30 8:51 10.9
1:00:00 6:00 9:39 10.0
1:10:00 7:00 11:16 8.6
1:20:00 8:00 12:52 7.5

Source: calculated here from 10 km.

Half marathon (21.0975 km): finish time and pace
Half timePer kmPer milekm/h
1:30:00 4:16 6:52 14.1
1:40:00 4:44 7:38 12.7
1:50:00 5:13 8:23 11.5
2:00:00 5:41 9:09 10.5
2:10:00 6:10 9:55 9.7
2:30:00 7:07 11:27 8.4

Source: calculated here from 21.0975 km.

Marathon (42.195 km): finish time and pace
MarathonPer kmPer milekm/h
3:00:00 4:16 6:52 14.1
3:15:00 4:37 7:26 13.0
3:30:00 4:59 8:01 12.1
3:45:00 5:20 8:35 11.3
4:00:00 5:41 9:09 10.5
4:30:00 6:24 10:18 9.4
5:00:00 7:07 11:27 8.4

Source: calculated here from 42.195 km.

What are the standard race distances?

The marathon is 42.195 km (26 miles 385 yards), and World Athletics lists it among the standard road distances with the 5 km, 10 km, 15 km, 20 km, half marathon, 25 km, 30 km and 100 km. The half marathon is half the marathon, 21.0975 km. A mile is defined as 1,609.344 meters, so every mile figure on this page is a kilometer figure divided by 1.609344. For other units, the kg to lbs and cm to inches converters work the same way.

Common race distances
RaceKilometersMiles
1 mile 1.6093 1.0000
5K 5 3.1069
10K 10 6.2137
Half marathon 21.0975 13.1094
Marathon 42.195 26.2188

Source: World Athletics Technical Rules, Part VII (road races); NIST for the mile.

How do you convert min per km to min per mile?

Multiply the pace per kilometer by 1.609344 to get the pace per mile, and divide to go back. A 5:00 per km pace is 5:00 × 1.609344 = 8:03 per mile. Speed is 60 divided by the pace in minutes, so 5:00 per km is 12 km/h.

Pace conversion
Per kmPer milekm/hmph
4:30 7:15 13.3 8.3
5:00 8:03 12.0 7.5
5:30 8:51 10.9 6.8
6:00 9:39 10.0 6.2
6:30 10:28 9.2 5.7
7:00 11:16 8.6 5.3
7:30 12:04 8.0 5.0

Source: calculated here; 1 mile = 1.609344 km.

Should you run even or negative splits?

Splits are the times for each kilometer or mile. An even split holds one pace from start to finish. A negative split runs the second half faster than the first, so the finish time stays the same while the early kilometers are slower. The tool above makes a negative split by making the first half a set percentage slower than your average pace and the second half the same percentage faster.

Pace per kilometer, 10K in 50:00: even and 3% negative
1 2 3 4 5 6 7 8 9 10 Kilometer First half 5:09, second half 4:51 per km (negative); 5:00 throughout (even) Negative Even

Neither plan is the right one for everyone. A negative split holds back early effort, while an even split is easier to follow on a flat course, and hills, wind and heat can force uneven kilometers whatever the plan.

Can you predict one race time from another?

A common method comes from Peter Riegel, who published a formula in American Scientist in 1981: the time for a new distance equals the known time multiplied by the distance ratio raised to the power 1.06. It is an estimate fitted to athletic records, not a rule your legs have to obey.

Riegel formula (1981)
T2 = T1 × (D2 / D1)1.06

T1 is the time you ran over distance D1; T2 is the predicted time over D2. The exponent above 1 means pace slows as the distance grows.

Estimates from a 25:00 5K
DistanceEstimated timePer km
10K 52:07 5:13
Half marathon 1:55:00 5:27
Marathon 3:59:47 5:41

Source: Riegel (1981) formula with exponent 1.06; an estimate, not a forecast.

Estimates from a 50:00 10K
DistanceEstimated timePer km
5K 23:59 4:48
Half marathon 1:50:19 5:14
Marathon 3:50:01 5:27

Source: Riegel (1981) formula with exponent 1.06; an estimate, not a forecast.

Predictions work best between nearby distances. Going from a 5K to a marathon assumes the endurance training to match, and weekly mileage, course, weather and pacing can move a real marathon time a long way from the figure in the table.

Common questions

What is a good running pace?

It depends on age, training and the distance, and no single number applies to everyone. A more useful comparison is your own earlier pace over the same route. The pace tables above show what a goal time asks of each kilometer or mile.

How do I turn minutes per mile into km per hour?

Divide 60 by the pace in minutes to get miles per hour, then multiply by 1.609344. A 9:00 mile is 60 ÷ 9 = 6.67 mph, or 10.7 km/h.

How do I find the pace I need for a goal time?

Choose “Pace”, pick the race distance and enter the goal time. A 4-hour marathon needs 5:41 per km, or 9:09 per mile. To time a training run itself, the online stopwatch keeps laps, and the time calculator adds up split times.

Why do my watch splits not match the calculator?

The calculator splits are exact fractions of the distance. A watch measures by GPS and can read a route a little long or short, especially among tall buildings or under trees, and measured race courses have their own certified length.

Sources

Last reviewed November 9, 2026. Estimates only. For information only; not medical advice. Talk to a doctor before you start a hard training plan, especially if you have a health condition.