Skip to content

Area calculator

Area of rooms and common shapes in any unit.

Mode
  • Circle: enter the radius, half the width across.
  • Trapezoid: height is the straight distance between the parallel sides, not the slanted edge.
  • Sector: the angle is in degrees; 90 is a quarter circle.

Area

20m²

Perimeter 18 m

Drawn to scale from your numbers
Square meters
20
Square feet
215.3
Square yards
23.92

Results are for planning. Measure twice and ask your supplier how much extra to order.

Area formulas for common shapes

An area calculator finds the flat surface a shape covers, in square units. Every formula below is a version of one idea: count how many unit squares fit inside. This calculator uses these exact formulas and shows the shape drawn to scale, so a typo such as a diameter entered as a radius shows up as a shape that looks wrong.

Area formulas with one example each
ShapeFormulaExampleArea
Rectangle length × width 5 × 4 20
Square side × side 3 × 3 9
Triangle ½ × base × height ½ × 8 × 5 20
Circle π × radius² π × 2² 12.57
Trapezoid ½ × (top + bottom) × height ½ × (4 + 6) × 3 15
Ellipse π × a × b π × 3 × 2 18.85
Sector (angle ÷ 360) × π × radius² (90 ÷ 360) × π × 10² 78.54
L-shaped room length × width − cut-out length × cut-out width 6 × 5 − 2 × 3 24

Source: standard plane geometry; see MathWorld pages for the trapezoid, ellipse and circular sector.

The sector formula is the circle formula scaled down: a 90 degree wedge is a quarter of the full circle, so it takes a quarter of π × radius². The ellipse reduces to the circle when a and b are equal.

Worked examples

Worked example · floor area in two systems

A bedroom measures 4.2 m by 3.6 m.

  1. Multiply the sides: 4.2 × 3.6 = 15.12 m².
  2. Divide by 0.09290304 (square meters in a square foot): 162.75 ft².
  3. Or convert each side first: 4.2 m = 13.78 ft and 3.6 m = 11.81 ft, and 13.78 × 11.81 = 162.7 ft². The small gap is rounding in the sides.
Worked example · circular patio

A round patio is 4 m across. The calculator asks for the radius, which is half the width.

  1. Radius = 4 ÷ 2 = 2 m.
  2. Area = π × 2² = 12.57 m², or 135.3 ft².

How do you find the area of an L-shaped room?

Treat it as a simple shape with a corner missing, or as two rectangles joined. Both routes give the same number, and doing the sum both ways is a cheap check on your measurements. Room mode in the calculator does the second route: enter each rectangle, and mark a closet or stairwell as a cut-out to take it off.

A: 12 B: 12 12 + 12 = 24 m² 30 −6 30 − 6 = 24 m² Add two rectangles Subtract the missing corner
The same 6 m by 5 m room with a 2 m by 3 m corner missing, worked two ways.
A three-part floor plan in room mode
PartSize (m)m²ft²
Living room 5 × 4 20.0 215.3
Bedroom 3.5 × 3 10.5 113.0
Closet cut-out − (1 × 2) −2.0 −21.5
Total 28.5 306.8

Source: calculated with the exact foot (0.3048 m), NIST SP 811.

Square units and how they convert

A square unit is a unit of length squared, so the conversion factor is squared too. One yard is 3 feet, but one square yard is 3 × 3 = 9 square feet. The international foot is defined as exactly 0.3048 m, which makes every row below exact except where the table shows a rounded value.

Area units in square meters and square feet
UnitSquare metersSquare feet
1 square inch (in²) 0.00064516 1 ÷ 144, about 0.00694
1 square foot (ft²) 0.09290304 1
1 square yard (yd²) 0.83612736 9
1 square meter (m²) 1 10.7639
1 acre 4,046.8564 43,560
1 hectare (ha) 10,000 107,639
1 square kilometer (km²) 1,000,000 10,763,910
1 square mile (mi²) 2,589,988 27,878,400

Source: NIST Guide to the SI, Appendix B.8 (square foot, square inch, square yard, square mile, hectare); the acre row is 43,560 ft² × 0.09290304.

NIST also lists an acre based on the older US survey foot, 4,046.873 m². It differs from the international acre used here by about four parts per million, or roughly 17 m² on 1,000 acres. Surveyors working from recorded land titles in the United States sometimes need the survey version.

Common mistakes

Five slips that change the answer
SlipWrongRight
Mixed units: 10 ft by 6 in 10 × 6 = 60 10 × 0.5 = 5 ft²
Squaring the conversion: 9 yd² to ft² 9 × 3 = 27 ft² 9 × 9 = 81 ft²
Diameter used as radius: 10 m circle π × 10² = 314.2 m² π × 5² = 78.5 m²
Triangle without the half: base 8, height 5 8 × 5 = 40 ½ × 8 × 5 = 20
Slanted side as height: trapezoid Uses the sloping edge Uses the straight-across distance

The drawing is the quick test. If the room you typed as 4 m by 3 m looks like a long corridor, one number is in the wrong box. For a trapezoid, the height is the straight distance between the two parallel sides, not the length of the sloping edge.

Common questions

What is the area of a room in square feet?

Multiply length by width in feet. The calculator opens in feet if your browser is set to the United States, Liberia or Myanmar, and in meters otherwise; change the Length unit menu if you measured in the other. Either way the square feet line divides square meters by 0.09290304.

How do I get the area of an irregular room?

Split it into rectangles, triangles or circles you can measure, find each area and add them. Room mode handles rectangles; for a bay window or a curved wall, work it out as a shape on its own and add the result by hand.

How many square feet are in an acre?

An acre is 43,560 square feet, or 4,046.86 square meters. A hectare is 10,000 square meters, about 2.47 acres.

Does the calculator work with mixed units like feet and inches?

Not in one field. Convert first: 10 feet 6 inches is 10.5 feet (6 inches is the fraction 1/2 of a foot, and our fraction calculator turns any inch fraction into a decimal). Or pick inches and enter 126. For centimeters and inches, use the cm to inches converter.

Should I add extra for cutting and waste?

Usually, and the amount depends on the material, the layout and the supplier. The area shown is the exact geometric figure for the numbers you enter. To add an allowance, such as 10% for cuts, the percentage calculator gives the increased total.

Sources

Last reviewed November 9, 2026.