How do you convert CGPA to percentage?
Multiply the CGPA by the factor your board or university prints; for CBSE that factor is 9.5, so a CGPA of 8.4 is 79.8%. Nothing in the maths is fixed by law: each body chooses its own rule, and a few subtract a small amount first. The calculator above takes the rule as a choice for that reason.
CBSE: a = 0, b = 9.5. Anna University and AKTU: a = 0, b = 10. GTU: a = 0.5, b = 10. For percentage to CGPA, run it backwards: CGPA = percentage ÷ b + a.
Worked example for GTU, using the formula GTU prints on its transcripts (we could not open GTU’s own circular online, so check the back of your marksheet): a CGPA of 7.45 gives (7.45 − 0.5) × 10 = 69.5%. The same 7.45 is 70.78% under CBSE’s ×9.5 and 74.5% under ×10, which is why two people with the same CGPA can write different percentages on the same form.
Why does CBSE use 9.5, and is it exact?
CBSE calls its figure an indicative equivalence, not a mark. In its 2010 circular and in its FAQ for Classes IX and X it gives the overall indicative percentage as 9.5 × CGPA and the subject-wise one as 9.5 × the subject’s grade point. The CGPA is the average of the grade points over all subjects except the additional sixth one.
CBSE does not say why 9.5. The drawing below shows what the factor does: for every grade, 9.5 times its grade point falls inside that grade’s own marks band. A grade point of 10 becomes 95 (band 91 to 100), a 9 becomes 85.5 (band 81 to 90), and so on down to 38 for a 4 (band 33 to 40). It is a mid-band estimate, so a student with all A1 grades gets 95%, never 100%.
| Grade | Marks | Grade point | 9.5 × point |
|---|---|---|---|
| A1 | 91 to 100 | 10 | 95 |
| A2 | 81 to 90 | 9 | 85.5 |
| B1 | 71 to 80 | 8 | 76 |
| B2 | 61 to 70 | 7 | 66.5 |
| C1 | 51 to 60 | 6 | 57 |
| C2 | 41 to 50 | 5 | 47.5 |
| D | 33 to 40 | 4 | 38 |
| E1 | 21 to 32 | none (fail) | n/a |
| E2 | 20 or less | none (fail) | n/a |
Source: CBSE Continuous and Comprehensive Evaluation manual, chapter 3 (grade points); the last column is our arithmetic.
Which university rules are published by the university itself?
Three are on this page, each tied to a document the issuer wrote. Many more rules circulate on calculator sites, but when we could not find the university’s own text we left the rule out instead of repeating it. Visvesvaraya Technological University (VTU) and the University of Mumbai are in that group: websites quote several formulas for each, depending on the scheme or year, and they disagree. For those, use the Custom option with the formula printed on your own marksheet or circular.
| Body | Rule | Document | CGPA 8.0 gives |
|---|---|---|---|
| CBSE | CGPA × 9.5 | Circular 24/2010; FAQ for Classes IX and X | 76% |
| Anna University | CGPA × 10 | Academic Regulations 2021, clause 15.5.3 (UG) | 80% |
| AKTU | CGPA × 10 | B.Des. ordinance 2017-18: "CGPA Earned x 10" | 80% |
| GTU | (CGPA − 0.5) × 10 | GTU transcript formula | 75% |
Source: the documents named; links in Sources. AKTU’s text is from one programme’s ordinance, so check your own programme’s.
Rules change by batch. Anna University’s older regulations and AKTU’s other programmes may word it differently, and a conversion that was right for one admission year is not automatically right for another. When a university will not state a formula, many colleges issue a signed “CGPA to percentage” certificate on request; that paper counts for more than any online calculator in an admission or visa file.
CGPA to percentage table
The same CGPA under three rules. This is the arithmetic behind the leaning lines in the slide rule above.
| CGPA | CBSE × 9.5 | × 10 | GTU −0.5 |
|---|---|---|---|
| 10.0 | 95 | 100 | 95 |
| 9.5 | 90.25 | 95 | 90 |
| 9.0 | 85.5 | 90 | 85 |
| 8.5 | 80.75 | 85 | 80 |
| 8.0 | 76 | 80 | 75 |
| 7.5 | 71.25 | 75 | 70 |
| 7.0 | 66.5 | 70 | 65 |
| 6.5 | 61.75 | 65 | 60 |
| 6.0 | 57 | 60 | 55 |
| 5.5 | 52.25 | 55 | 50 |
| 5.0 | 47.5 | 50 | 45 |
Source: calculated with the formulas above; rounded to two decimals.
How do you convert percentage to CGPA?
Divide the percentage by the factor and add back what the rule subtracted. Under CBSE’s rule 79.8% ÷ 9.5 = 8.4; under ×10, 82% ÷ 10 = 8.2; under GTU, 69.5% ÷ 10 + 0.5 = 7.45. One limit matters: the CBSE and GTU rules top out at 95%, so 96% has no CGPA under them, and the tool says so instead of returning a number above 10.
If you only want the percentage of marks you scored, skip CGPA and use the percentage calculator on the marks. To work out a CGPA from semester results, the GPA calculator and the grade calculator do the weighting.
What goes wrong on forms
- Using ×9.5 for a university degree. CBSE’s 9.5 is for CBSE grade points in Classes IX and X. A university’s own regulation does not borrow it.
- Mixing SGPA and CGPA. SGPA covers one semester; the formulas in the documents above are for the cumulative figure.
- Writing an indicative figure as marks. CBSE’s own wording is “indicative”. Write “equivalent percentage” and name the rule if the form allows a note.
- Rounding early. Convert the full two-decimal CGPA, then round the result once.
- Applying a 10-point rule to a 4-point GPA. A US-style 4.0 GPA is a different scale; this page does not convert it.
This calculator is for information only and is not academic or admissions advice. Everything runs in your browser; nothing you type is sent anywhere.
Sources
- CBSE: Circular on the grading scheme for Class X, 2010 (9.5 × CGPA)
- CBSE: FAQs for Classes IX to XII (how CGPA is calculated)
- CBSE: CCE manual, chapter 3 (nine-point grading scale)
- Anna University: Undergraduate Academic Regulations 2021
- AKTU: B.Des. ordinance 2017-18
- Gujarat Technological University: the (CPI − 0.5) × 10 rule is the one GTU prints on transcripts; its 2012 circular is no longer online, so confirm against your own marksheet.
Last reviewed November 17, 2026. Some university sites block automated checks or are slow to open; if a link fails, search the document title on that university’s site.
Related tools