What does a mouse test check?
A mouse test checks that every button and the scroll wheel register in your browser, and it flags a button that sends two clicks for one press. Everything happens inside the box at the top of the page. Each button lights up on the diagram while it is held and stays tinted once it has worked, so a button that never changes color is the one to worry about. The counters keep a tally per button, and the wheel counts every scroll step up and down.
Below the diagram, two timers run on every press. The fault detector watches for the same button going down twice within a short gap, which is the signature of a worn switch. The double-click timer measures the gap between two left clicks, so you can see how fast you double-click and how that compares with your computer's setting. The page only listens and does not store or send what you click. If the buttons pass but the pointer itself feels off, our touch screen test covers screens and gamepad tester covers controllers.
Button numbers
Browsers identify mouse buttons by number. The extra side buttons are numbers 3 and 4, and they are the ones most likely to go missing: some browsers, drivers and mouse apps handle Back and Forward themselves and never pass them to the page. If they do not light up here, try another browser before blaming the mouse.
| Number | Button | Notes |
|---|---|---|
| 0 | Main (usually left) | Swaps with right if the buttons are set for left-handed use |
| 1 | Middle (wheel press) | Often opens links in a new tab or starts auto-scroll |
| 2 | Secondary (usually right) | Opens the context menu, blocked inside the test |
| 3 | Fourth (usually Back) | Rear side button on most mice |
| 4 | Fifth (usually Forward) | Front side button on most mice |
Source: MDN Web Docs, MouseEvent.button. Mouse software can remap any of these.
How do you find a double-click fault?
Click each button slowly at least 50 times and watch the fault counter. A mouse with a failing switch sends two clicks when you press once. It shows up as files opening when you meant to select them, or a drag that lets go halfway. The fault comes and goes, so one quick try proves little. Press deliberately, one click at a time. At that pace no real click comes anywhere near the threshold, so every flag in the log is a press you did not make.
The default threshold is 80 milliseconds, far below the 500 ms Windows allows for a double-click and short enough that a deliberate double-click rarely trips it. If you double-click unusually fast and see false alarms, lower it; to catch a fault that arrives later, raise it and keep clicking slowly.
No faults after 50 slow clicks per button: the switches are fine. A fault or two only during fast clicking: probably your own finger. Faults while clicking slowly, especially on one button only: the switch is worn.
Why does a mouse start double-clicking by itself?
A worn or dirty switch is the usual cause. Most mouse buttons sit on a small mechanical switch. When the metal contacts close, they bounce apart and touch again several times before settling; one measured switch bounced many times over 2.6 milliseconds. The mouse's firmware ignores that chatter for a short time after the first contact. As a switch wears or its contacts oxidize, the bounce can last longer than that window, and the extra contact arrives at the computer as a second click.
| Switch | How it detects a press | Double-click risk |
|---|---|---|
| Mechanical | Metal contacts snap together | Rises with wear and dirt on the contacts |
| Optical | The button interrupts a light beam | Low; no metal contacts to bounce or corrode |
| Touchpad tap | The driver turns a touch into a click | No switch; check the driver tap settings |
Source: Wikipedia, Switch (contact bounce) and Keyboard technology (optical switches).
What is a normal double-click speed?
The Windows default allows up to 500 milliseconds between two clicks. Your computer decides whether two clicks are one double-click by the gap between them. On Windows the default limit is 500 milliseconds, and it can be set as high as 5 seconds. People new to a mouse and older users often have trouble double-clicking in time, which is what the speed setting is for.
- Windows 11: Settings, Bluetooth & devices, Mouse, Additional mouse settings, then the Double-click speed slider.
- macOS: System Settings, Accessibility, Pointer Control, then Double-click speed.
The "Last double-click" figure in the test is the gap between your two most recent left clicks when they came within a second of each other. If yours are regularly near or above 500 ms, a slower system setting will stop double-clicks from failing. To compare against your raw clicking speed, try our click speed test, or measure your reflexes with the reaction time test.
Polling rate and timing
A USB mouse reports to the computer at a fixed rate, and every timing on this page is only as fine as that rate. Treat a gap measured on a 125 Hz mouse as accurate to about 8 milliseconds.
| Polling rate | Time between reports | Typical use |
|---|---|---|
| 125 Hz | 8 ms | Common on basic mice |
| 500 Hz | 2 ms | Offered as a setting on gaming mice |
| 1,000 Hz | 1 ms | Gaming mice; uses more battery when wireless |
Source: calculated as 1,000 ms divided by the rate; Logitech, What is polling rate on a mouse?
Problems and fixes
- Faults on one button. Blow out dust around the button, and check whether the mouse's own software offers a debounce setting; a longer one can hide early wear. Otherwise the switch needs replacing, or the mouse does, which may be covered by its warranty.
- Back and Forward never light up. Close the mouse's companion app or check it has not remapped the buttons, then try a Chromium-based browser and Firefox.
- One wheel step counts as several. Touchpads and free-spinning or smooth-scrolling wheels send many small scroll events. A notched wheel usually sends one per step.
- Left and right are swapped. The primary button is set to right in your system's mouse settings.
Common questions
One fault showed up. Is my mouse broken?
Not necessarily. If it appeared while you were clicking fast, it may have been your finger. Repeat the slow test on that button; a worn switch keeps producing faults.
Can I test a laptop touchpad?
Yes. Taps and physical presses count as clicks, and two-finger scrolling counts on the wheel counter, though it sends many small steps rather than one per notch.
Why can't I right-click inside the box?
The menu is blocked there so a right click can be counted without a menu covering the test. Outside the box, right click works as normal.
Does the test record anything?
The counts live in the page until you reload or press Reset. The test does not save or upload them; the site only counts page views.
Sources
- MDN Web Docs: MouseEvent.button
- MDN Web Docs: auxclick event
- MDN Web Docs: wheel event
- Microsoft Learn: SetDoubleClickTime (500 ms default, 5,000 ms maximum)
- Microsoft Support: Change mouse settings
- Apple Support: Change Mouse settings on Mac
- Wikipedia: Double-click
- Wikipedia: Switch (contact bounce)
- Wikipedia: Keyboard technology (optical switches)
- Logitech: What is polling rate on a mouse?
Last reviewed November 9, 2026.