Skip to content

Steel weight calculator

Weight of steel plate, bar, rebar, pipe and beams by size.

mm
mm
mm
Units
Material

Total weight

245.3kg

Weight per meter
–
Per piece
–
In the other unit
–
Pieces per metric ton
–

Cross-section, drawn to scale

Theoretical weight at nominal size. Mill tolerances and corner radii change real weight.

How is the weight of steel calculated?

A steel weight calculator multiplies the cross-section area by the length and by the density. Carbon steel is taken as 7,850 kg/m³, so one square meter of 1 mm sheet weighs 7.85 kg. For anything with a constant section, the weight per meter comes first and the length scales it.

Weight formulas, size in mm, result in kg per meter (steel, 7,850 kg/m³)
kg/m = area (mm²) × 7.85 ÷ 1,000

For aluminum use 2.70 in place of 7.85, for 304 or 316 stainless about 8.00.

Area to use for each shape
ShapeArea (mm²)Weight per meter (steel)
Plate or flat bar thickness × width thickness × width × 0.00785
Round bar π ÷ 4 × d² d² × 0.006165
Square bar a² a² × 0.00785
Round pipe π ÷ 4 × (OD² − (OD − 2t)²) (OD − t) × t × 0.02466
Square or rectangular tube w × h − (w − 2t)(h − 2t) area × 0.00785

Source: geometry; density 7,850 kg/m³.

What does a 12 mm bar or a 10 mm plate weigh?

A 10 mm plate that is 1,250 mm wide and 2.5 m long weighs 245.3 kg; a 12 m length of 12 mm bar weighs 10.7 kg. The steps for the plate:

Worked example: plate 10 × 1,250 mm, 2.5 m long
  1. Area: 10 × 1,250 = 12,500 mm².
  2. Weight per meter: 12,500 × 7.85 ÷ 1,000 = 98.125 kg/m.
  3. Times 2.5 m: 245.3 kg. In pounds, multiply by 2.2046 (the weight converter does it): about 541 lb.
  4. At a price of 0.85 per kg the plate costs 208.5.

How much does rebar or TMT weigh per meter?

Rebar weighs its nominal diameter squared divided by 162.2, in kg per meter, when the diameter is in millimeters: a 12 mm bar is 144 ÷ 162.2 = 0.888 kg/m. The divisor is 4,000,000 ÷ (π × 7,850), which is why 162 works as a shortcut on site. Indian TMT bars under IS 1786 are rated on this nominal mass, with sizes from 8 to 50 mm.

Metric rebar and TMT bars
Diameterkg per meterBars per tonne (12 m)
8 mm 0.395 211.20
10 mm 0.617 135.17
12 mm 0.888 93.87
16 mm 1.578 52.80
20 mm 2.466 33.79
25 mm 3.853 21.63
28 mm 4.834 17.24
32 mm 6.313 13.20

Source: d² ÷ 162.2; matches the nominal masses listed for IS 1786 bars (8 mm 0.395, 12 mm 0.888, 20 mm 2.466 kg/m).

US rebar sizes (ASTM A615)
BarDiameter (in)lb per ftkg per m
#3 0.375 0.376 0.560
#4 0.500 0.668 0.994
#5 0.625 1.043 1.552
#6 0.750 1.502 2.235
#7 0.875 2.044 3.042
#8 1.000 2.670 3.973
#9 1.128 3.400 5.060
#10 1.270 4.303 6.404
#11 1.410 5.313 7.907

Source: Rebar (Wikipedia), from ASTM A615 nominal sizes.

Real bars are allowed to run a few percent over or under the nominal figure, so a delivery weighed on a scale can differ from the table. The tolerance bands are set in IS 1786 itself; read them there before rejecting a lot on weight.

Which density should you use for stainless steel and aluminum?

Use 7,850 kg/m³ for carbon steel, about 8,000 for 304 and 316 stainless and 2,700 for common aluminum alloys. Stainless grades vary by a few percent, so a mill certificate beats any table.

Aluminum2,700 Carbon steel7,850 Stainless≈ 8,000
Density in kg/m³: the same bar in aluminum weighs about a third as much as in steel.

For painting or coating quotes, the area calculator gives the surface of a sheet or a wall.

What do IPE and W beams weigh?

An IPE 200 weighs 22.4 kg per meter and a W10×49 weighs 49 lb per foot. European IPE sections are named by depth in millimeters; US W shapes carry the nominal depth in inches and the weight in pounds per foot in the name.

Selected IPE sections (EN 10365)
Sectionh × b (mm)Web / flange (mm)kg per meter
IPE 100 100 × 55 4.1 / 5.7 8.1
IPE 160 160 × 82 5 / 7.4 15.8
IPE 200 200 × 100 5.6 / 8.5 22.4
IPE 240 240 × 120 6.2 / 9.8 30.7
IPE 300 300 × 150 7.1 / 10.7 42.2
IPE 360 360 × 170 8 / 12.7 57.1
IPE 400 400 × 180 8.6 / 13.5 66.3
IPE 500 500 × 200 10.2 / 16 90.7
IPE 600 600 × 220 12 / 19 122.0

Source: British Steel, IPE sections data sheet. The calculator lists all 17 sizes from IPE 100 to IPE 600.

Selected W shapes (US)
SectionNominal depthlb per ftkg per meter
W8×31 8 in 31 46.1
W10×49 10 in 49 72.9
W12×40 12 in 40 59.5
W14×53 14 in 53 78.9
W16×40 16 in 40 59.5
W18×50 18 in 50 74.4
W21×62 21 in 62 92.3
W24×76 24 in 76 113.1

Source: the weight and depth come from the section name (AISC convention); kg/m = lb/ft × 1.4882. Exact flange and web sizes are in the AISC Shapes Database.

Why does a quoted weight differ from the calculator?

  • Mill tolerance. Plate thickness and bar diameter vary within the standard; a plate cut at the minus tolerance weighs less than nominal.
  • Corner radii. Square tube has rounded outside corners, and the tool treats corners as sharp, so it reads slightly high.
  • Pipe schedule versus wall. Enter the wall thickness from the pipe table, not the schedule number.
  • Mixing mm and inches. Switch the unit first, then type; the tool converts what is already in the boxes.
  • Galvanizing and paint. Zinc coating adds a few percent for thin sections and is not included.

Comparing suppliers? The unit price calculator puts two quotes on the same per-kg basis, and the length converter turns bar lengths between meters and feet.

Sources

Last reviewed November 17, 2026. Figures are theoretical weights at nominal size, for estimating only; check the mill certificate and the governing standard for orders. The calculator runs in your browser; nothing you enter is sent anywhere. We could not open the IS 1786 mass table itself: the rebar masses on this page are computed with the standard's 7,850 kg/m³ basis and agree with the figures widely quoted for it.