Skip to content

MP4 to MP3

Pull the audio out of a video as MP3.

The waveform is drawn while the file converts.

Bitrate

MP3 encoding: lamejs (LGPL-3.0). Decoding: mediabunny (MPL-2.0).

The file is decoded and encoded in this tab and is not uploaded. What opens depends on your browser: MP4 with AAC audio works in current Chrome, Edge, Firefox and Safari.

How do you convert MP4 to MP3?

Choose the file, pick a bitrate and press Convert to MP3. The page opens the MP4 and finds its audio track, decodes the sound into raw samples, and passes them in small pieces to an MP3 encoder running in a background thread. When the last piece is done you get a file to play and download. The video part of the file is never decoded, so a long film converts faster than it plays back. Nothing leaves your device.

Often the better route for a voice note is to record it as audio in the first place: the voice recorder saves WebM, MP4 or WAV, and this page then turns any of them into MP3 for software that only takes MP3. If the clip is part of a longer video and you want pictures instead, the GIF maker cuts a short stretch into a GIF.

Your fileMP4, MOV, WebM Open containerfind audio track DecodeAAC or Opus to samples Worker encodes18,432 samples a chunk MP3 file128 to 320 kbps next chunk, once the worker is free
Decoding waits for the encoder, so memory stays small even for a two-hour recording.

Which bitrate should you pick?

Choose 128 kbps for speech and anything you only listen to casually, 192 kbps as a general default for music, and 320 kbps when the MP3 is an archive copy or goes to a picky player. MP3 is a constant-bitrate setting here: every second of sound takes the same number of bytes whatever it contains, which makes the file size predictable. The three bars in the tool are drawn to scale, so you can see the cost of each step.

Choosing a bitrate
BitrateGood forPer minute
128 kbps Speech, podcasts, lectures, voice notes 0.96 MB
192 kbps Everyday music on phones and speakers 1.44 MB
320 kbps Archive copies, good headphones, DJ software 2.40 MB

Source: calculated: kbps × 1,000 ÷ 8 × 60 seconds; 1 MB = 1,000,000 bytes. The use column is editorial guidance.

How big will the MP3 be?

Size follows from the length and the bitrate alone: bytes equal bitrate times seconds divided by eight. A 3-minute song at 192 kbps is 4.32 MB. The tool shows the estimate beside each bar as soon as it knows the length. The real file lands within a few percent of it, because the encoder adds a small header and pads the last frame.

Typical lengths at each bitrate
Length128 kbps192 kbps320 kbps
3 minutes (a song) 2.88 MB 4.32 MB 7.20 MB
30 minutes (a lecture) 28.8 MB 43.2 MB 72.0 MB
1 hour (a podcast) 57.6 MB 86.4 MB 144 MB
2 hours (a film) 115 MB 173 MB 288 MB

Source: calculated: kbps × 1,000 ÷ 8 × seconds; 1 MB = 1,000,000 bytes.

A file that is too large for an upload form can be split, or reduced to 128 kbps. If you only need a still from the video, Crop image and Compress image handle a screenshot.

Which files will open?

The page reads the container (MP4, MOV, WebM, Matroska, Ogg and common audio files) with a library called mediabunny, which asks the browser to decode the audio. So the question is whether your browser can decode the track inside. AAC, the usual audio in MP4 and MOV files, and Opus, the usual audio in WebM, work in current desktop browsers. If that route fails, the page makes a second attempt through the browser's own audio decoder, which can handle some files the first cannot. If both fail, you will see a message and nothing is converted.

Source files and what to expect
FileUsual audioExpect
MP4, M4V AAC Opens in current browsers
MOV (iPhone) AAC Opens if the browser can decode AAC; the HEVC video does not matter
WebM Opus or Vorbis Opens in current browsers
M4A AAC or Apple Lossless AAC opens; Apple Lossless depends on the browser
Screen recordings Opus (WebM) or AAC (MP4) Opens; save them with the screen recorder

Source: Depends on the browser's decoders; this site's own guidance, not a guarantee.

A recording from the screen recorder is a good test file. If the picture or sound is wrong in your recording, check the source with the mic test or the speaker test before converting.

Does MP3 lose quality?

Yes, and so did the sound in your MP4. Both AAC and MP3 are lossy: they throw away detail the ear is least likely to notice to make the file small. Converting from one lossy format to another decodes the first and compresses the result again, so the output can only be as good as the source, never better. Choosing 320 kbps for a video whose audio was 96 kbps AAC makes a larger file, not a cleaner one.

A rule that avoids wasted space

Pick a bitrate no higher than the bitrate of the source audio. If you do not know it, 192 kbps is safe for most files from phones and video sites. For speech from a phone or a meeting recording, 128 kbps loses nothing you could hear.

One technical point: the MP3 encoder accepts sample rates of 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz. Nearly all video audio is 44.1 or 48 kHz and passes through unchanged. A rare source at 88.2 or 96 kHz is resampled to the nearest of those. Sound with more than two channels is reduced to left and right.

Whose audio can you convert?

Convert recordings you made, audio you have permission to use, or material the owner has released for reuse. Ripping the soundtrack of a film, a streamed concert or someone else's video may break the copyright and the platform's terms even when the tool itself works. This page does not fetch anything from the internet; it only works on files you already have. This is general information, not legal advice.

Common questions

Is my file uploaded anywhere?

No. The browser reads the file from your device, and decoding and encoding both happen in the tab. The site counts page views.

Why is the conversion slow on a phone?

Encoding MP3 is real work. A recent laptop typically converts much faster than the audio plays; phones are slower. Keep the screen on and the tab in front for long files, because browsers slow down background tabs.

Can I convert just part of a file?

Not on this page; it converts the whole audio track. To keep only a stretch, record or trim first.

Why did it say there is no audio?

Some video files, such as silent screen captures, have no sound track at all. Open the file in a media player to check.

Does it work offline?

Once the page has loaded, yes: no step needs a server. Reloading the page offline will not work unless your browser cached it.

Sources and licences

Last reviewed November 9, 2026.