Skip to content

Gamepad tester

Buttons, triggers and stick drift for any controller.

No controller yet

LT RT A B X Y

Press any button on your controller

Plug it in or pair it first. Browsers keep controllers hidden from a page until you press something, so moving a stick may not be enough.

Panel

Left stick

X
0.000
Y
0.000
Dist
0.000

Right stick

X
0.000
Y
0.000
Dist
0.000

Roll each stick around the edge: the dot should reach the ring all the way round. Dashed circle: your recommended deadzone after a drift check.

Works best in Chrome and Edge; Firefox has no vibration; Safari support is partial. Keep this tab in front. Nothing is recorded or sent.

What is a gamepad tester?

A gamepad tester is a page that reads your controller through the browser and shows every button, trigger and stick as you press it, so you can spot a dead input or a drifting stick. The browser's built-in Gamepad API reports each controller as a list of buttons, each with a value from 0 to 1, and a list of axes from -1 to 1. This page reads that list on every screen refresh and draws it. Controller input stays in this tab.

If the buttons all register but the game still feels wrong, try our keyboard test or mouse test to rule out the rest of the setup, or the reaction time test to see how fast you react with a different input.

You have to press a button before anything shows: the W3C specification tells browsers to hide controllers until a "gamepad user gesture", so a site cannot list your hardware to fingerprint you. Most browsers also stop sending input to a background tab, so keep the page in front.

The standard button layout

When the browser recognizes a controller, it rearranges the inputs into the specification's "standard" layout, shaped like an Xbox or PlayStation pad, and reports mapping: "standard". Button 0 is then always the bottom face button, whatever it is called on your controller.

Standard gamepad mapping: index and position
InputPosition (Xbox, PlayStation, Nintendo names)
Button 0 Bottom face button (A, Cross, B on Nintendo)
Button 1 Right face button (B, Circle, A on Nintendo)
Button 2 Left face button (X, Square, Y on Nintendo)
Button 3 Top face button (Y, Triangle, X on Nintendo)
Button 4 Left bumper (LB, L1, L)
Button 5 Right bumper (RB, R1, R)
Button 6 Left trigger (LT, L2, ZL)
Button 7 Right trigger (RT, R2, ZR)
Button 8 Left center (View, Share or Create, Minus)
Button 9 Right center (Menu, Options, Plus)
Button 10 Left stick press (L3)
Button 11 Right stick press (R3)
Button 12 D-pad up
Button 13 D-pad down
Button 14 D-pad left
Button 15 D-pad right
Button 16 Center button (Xbox, PS, Home)
Axis 0 and 1 Left stick: left/right, up/down
Axis 2 and 3 Right stick: left/right, up/down

Source: W3C Gamepad specification, Standard Gamepad section. Axes run from -1 (left or up) to 1 (right or down).

Controllers the browser does not recognize, such as flight sticks, wheels and many generic pads, report an empty mapping; the Raw panel lists their buttons and axes by number.

Browser support

Gamepad API and vibration support by browser
BrowserButtons and sticksVibration
Chrome, Edge (desktop) Yes Yes, version 68 on
Firefox Yes No
Safari on Mac Yes Yes, version 16.4 on
Safari on iPhone and iPad Yes No

Source: MDN browser compatibility data for Navigator.getGamepads() and Gamepad.vibrationActuator, checked November 2026.

A controller can also stay silent over Bluetooth on some systems, so test vibration over USB before assuming the motors have failed.

What is stick drift?

Stick drift is a stick that reports movement when nobody is touching it: your character creeps forward or the camera turns on its own.

Most analog sticks measure position with two potentiometers, in which a contact slides along a resistive track. Repair site iFixit lists the usual causes: a worn track, dust and grime, outdated firmware or settings, and board damage, often from liquid. Hall effect sticks measure a magnet without touching it, so there is no track to wear.

How do you read the drift check?

Compare the largest resting value with the verdict table below. The check records both sticks for 3 seconds at rest and reports four figures on the 0 to 1 scale of the axes.

What the drift figures mean
FigureWhat it measures
Resting offset Where the stick sits on average, as a distance from true center
Largest at rest The farthest from center the stick read at any moment
Jitter How much the reading wobbles around its own average
Deadzone to set Largest at rest plus 0.02, rounded up; never below 0.03

Source: The Daily Summit.

Verdicts used by this tester
Largest at restVerdictWhat it usually means
Under 0.05 Centered Normal noise; a game default deadzone hides it
0.05 to 0.15 Small offset Often hidden by a game deadzone; watch whether it grows
0.15 or more Drift likely Games are likely to see movement at rest

Source: this tool's rule of thumb, not a manufacturer or industry standard.

A deadzone is a circle around center that a game treats as zero. Many games let you set it in their controls menu. A larger deadzone hides drift but costs fine aim, so set it no bigger than the number above. If the check gives different answers, run it a few times and use the largest; a record of those numbers also helps if a repair service asks what the stick is doing.

What manufacturers suggest

Start with the free steps. Update the controller's firmware, recalibrate it if the console offers that, and take off any skins or grips, which can hold a stick slightly off center.

  • Nintendo Switch Joy-Con: Nintendo's support page recommends calibrating the control sticks, installing the latest updates and removing skins or covers. In the European Economic Area, the UK and Switzerland, Nintendo says Joy-Con stick repairs are free, including after the warranty, subject to exclusions.
  • PlayStation DualSense: Sony's troubleshooting page describes a reset button inside the small hole next to the Sony logo on the back of the controller. With the console off and the cable unplugged, press it for at least 5 seconds.
  • Any controller: opening it to replace a stick can void the warranty. iFixit publishes stick replacement guides for common pads.

Common questions

Why doesn't my controller show up?

Press a face button, not just a stick. If it still does not appear, check that the controller works in another app and that a game launcher is not holding it.

Can I test a controller on my phone?

Often yes: a Bluetooth controller paired with the phone shows up the same way. To check the phone's own display instead, use our touch screen test.

Why is the B button lit when I press A on my Switch controller?

The standard layout names buttons by position, not by letter. Nintendo puts B at the bottom and A on the right, the reverse of Xbox, so the diagram shows the bottom button lit. The input is being read correctly.

Sources

Last reviewed November 9, 2026.