How GPA is calculated
A GPA calculator finds a credit-weighted average. Each course's letter grade becomes grade points, the points are multiplied by the course's credits to give quality points, and the quality points are divided by the total credits. A 4-credit course counts four times as much as a 1-credit course, which is why a plain average of letters is wrong. Weights work the same way inside one course, which our grade calculator handles for categories like homework and exams.
| Course | Credits | Grade | Points | Quality |
|---|---|---|---|---|
| Calculus I | 4 | A- | 3.7 | 14.8 |
| Biology | 4 | B+ | 3.3 | 13.2 |
| English 101 | 3 | A | 4.0 | 12.0 |
| US History | 3 | B | 3.0 | 9.0 |
| Physical education | 1 | A | 4.0 | 4.0 |
| Total | 15 | 53.0 |
Source: grade points from the Pepperdine University registrar scale.
Semester GPA = 53.0 ÷ 15 = 3.53. These are the courses the calculator loads as Semester 1.
The 4.0 scale with plus and minus grades
The calculator uses the values published by the Pepperdine University registrar: A is 4.0, A- is 3.7, then each step down is 0.3 or 0.4, with D- at 0.7 and F at 0.0. Pass, withdrawn and incomplete marks carry no grade points, so leave the grade blank (or pick the dash) and the course is left out.
| Letter | Grade points | Percent (common guide) |
|---|---|---|
| A+ | 4.0 (some schools 4.3) | 97 – 100 |
| A | 4.0 | 93 – 96.9 |
| A- | 3.7 | 90 – 92.9 |
| B+ | 3.3 | 87 – 89.9 |
| B | 3.0 | 83 – 86.9 |
| B- | 2.7 | 80 – 82.9 |
| C+ | 2.3 | 77 – 79.9 |
| C | 2.0 | 73 – 76.9 |
| C- | 1.7 | 70 – 72.9 |
| D+ | 1.3 | 67 – 69.9 |
| D | 1.0 | 63 – 66.9 |
| D- | 0.7 | 60 – 62.9 |
| F | 0.0 | below 60 |
Source: points: Pepperdine University Registrar; percent bands are our own guide to the common 90/80/70/60 scale, not a universal rule.
Why your school may differ
There is no single national scale. Schools agree on A as 4.0 and F as 0.0, then diverge at the edges: whether an A+ exists and what it is worth, whether D+ and D- are used at all, and whether the steps are 0.3 or thirds such as 3.67. The University of Chicago registrar, for example, publishes a second scale with an A+ of 4.33 for some programs.
| School | A+ | A- | D+ | D- |
|---|---|---|---|---|
| Pepperdine University | not used | 3.7 | 1.3 | 0.7 |
| Boston University | not used | 3.7 | not used | not used |
| University of Chicago (first scale) | 4.0 | 3.7 | 1.3 | not used |
| UNC Chapel Hill | 4.3, rarely awarded | 3.7 | 1.3 | not used |
Source: each school's registrar page, listed under Sources.
If your A+ is worth more than 4.0, switch the A+ setting under the courses. If your school drops the plus or minus for a letter, enter the nearest letter. When in doubt, the registrar page for your school is the authority, and this calculator is only as exact as the scale you match it to.
Cumulative GPA and prior credits
Cumulative GPA is the same sum across every term. You do not need each old course: credits so far times GPA so far gives the quality points you already have, and the new term adds its own.
- Prior quality points: 30 × 3.20 = 96.0.
- This term's quality points: 53.0 over 15 credits.
- Cumulative: (96.0 + 53.0) ÷ (30 + 15) = 149.0 ÷ 45 = 3.31.
The weight of history shows in the chart. With 30 credits behind you, a 15-credit term moves the average, but only by a third of the way to that term's own GPA.
Common mistakes
| Slip | Wrong | Right |
|---|---|---|
| Averaging grade points without credits: A in 4 credits, F in 1 | (4.0 + 0) ÷ 2 = 2.00 | 16 ÷ 5 = 3.20 |
| Counting a 3-credit Pass as an F on 15 credits at 3.50 | 52.5 ÷ 18 = 2.92 | 52.5 ÷ 15 = 3.50 |
| Reporting the term GPA as the cumulative GPA (30 prior credits at 3.20) | 3.53 | 3.31 |
| Using a weighted high-school scale on this unweighted one | Honors A as 5.0 | Enter A (4.0) here |
This is an unweighted GPA. Many high schools publish a weighted GPA that adds a point for honors or AP courses; that number is calculated by the school and will not match this one.
Common questions
How do I calculate my GPA with plus and minus grades?
Look up the points for each letter (A- is 3.7, B+ is 3.3 on the scale above), multiply by the credits, add them up and divide by the total credits. The calculator does this as you type. For a quick check by hand, the everyday calculator works, and the percentage calculator turns a course score into a percent first.
How do I calculate cumulative GPA?
Open the prior credits section and enter the credits and GPA you have so far, then add each new semester as a tab. The report card shows both the semester and the cumulative figure.
Do pass/fail and withdrawn courses count?
Usually not: P, W and I carry no grade points at the schools whose scales are cited below, so they are left out of both the points and the credits. A failing grade in a pass/fail course is policy-specific, so check your school.
What if I retake a course?
Schools differ: some replace the old grade, others average both. Enter whichever grades your school counts.
What average do I need to reach a target GPA?
Use the “What average do I need next?” box under the report card: it solves (target × total credits − current quality points) ÷ next credits. A result above 4.0 means the target cannot be reached in that many credits.
Sources
- Pepperdine University Registrar: Definition of grade points (the scale this calculator uses)
- Boston University Registrar: Grades and GPA
- University of Chicago Registrar: Grading system
- UNC Chapel Hill Registrar: Your grades
- University of Denver Registrar: Grade points and terms
- University of Cincinnati Registrar: Latin honors (the example bands on the GPA ladder: cum laude 3.60, magna 3.75, summa 3.90; other schools differ)
Last reviewed November 9, 2026. Registrar pages change; confirm the scale with your own school.