Skip to content

Length converter

Centimeters, inches, feet and meters.

175 centimeters equals

68.8976in

Feet and inches: 5 ft 8.9 in

1 cm = 0.393701 in

The value in every unit. Choose one to make it the target unit.

Exact factors from NIST and the SI Brochure. Results shown to 6 significant digits.

How do you convert cm to inches?

To convert cm to inches, divide by 2.54; to convert inches to cm, multiply by 2.54. Every unit on this converter is defined as an exact number of meters, so there is no rounding hidden in the factors themselves. An inch is 2.54 centimeters, not roughly 2.54. Any rounding you see comes only at the last step, when the result is cut to six significant digits for display.

Length units in meters
UnitSymbolIn metersDefined as
Millimeter mm 0.001 1/1,000 m
Centimeter cm 0.01 1/100 m
Kilometer km 1,000 1,000 m
Inch in 0.0254 1/12 ft
Foot ft 0.3048 1/3 yd
Yard yd 0.9144 set in 1959
Mile mi 1,609.344 1,760 yd
Nautical mile nmi 1,852 set in 1929

Source: NIST Handbook 44 (2026), Appendix C; BIPM, SI Brochure, 9th edition, Table 8.

Formulas with worked examples

To convert between any two units, change the value into meters and then into the target unit. The shortcuts below are the same arithmetic for the pairs people convert most.

Centimeters to inches
inches = cm2.54
= 302.54 = 11.811 in
Inches to centimeters
cm = inches × 2.54 = 15.6 × 2.54 = 39.624 cm

A 15.6-inch laptop screen measures 39.6 cm corner to corner.

Worked example: height in cm to feet and inches

Someone is 175 cm tall.

  1. Convert to inches: 175 ÷ 2.54 = 68.8976 in.
  2. Whole feet: 68.8976 ÷ 12 = 5.74, so 5 ft, which uses 60 inches.
  3. Inches left over: 68.8976 − 60 = 8.8976, about 8.9 in.
  4. Result: 5 ft 8.9 in, usually written 5′ 9″ once rounded to the nearest inch.
Miles and kilometers
km = miles × 1.609344
miles = km ÷ 1.609344

A 70 mph limit is 70 × 1.609344 = 112.654 km/h. A rough mental version: multiply miles by 8 and divide by 5.

Centimeters to inches chart

Inches are rounded to two decimal places. For a ruler reading, the nearest sixteenth of an inch is 0.0625 in.

1 to 100 cm in inches
cmincmincmincmin
1 0.39 26 10.24 51 20.08 76 29.92
2 0.79 27 10.63 52 20.47 77 30.31
3 1.18 28 11.02 53 20.87 78 30.71
4 1.57 29 11.42 54 21.26 79 31.10
5 1.97 30 11.81 55 21.65 80 31.50
6 2.36 31 12.20 56 22.05 81 31.89
7 2.76 32 12.60 57 22.44 82 32.28
8 3.15 33 12.99 58 22.83 83 32.68
9 3.54 34 13.39 59 23.23 84 33.07
10 3.94 35 13.78 60 23.62 85 33.46
11 4.33 36 14.17 61 24.02 86 33.86
12 4.72 37 14.57 62 24.41 87 34.25
13 5.12 38 14.96 63 24.80 88 34.65
14 5.51 39 15.35 64 25.20 89 35.04
15 5.91 40 15.75 65 25.59 90 35.43
16 6.30 41 16.14 66 25.98 91 35.83
17 6.69 42 16.54 67 26.38 92 36.22
18 7.09 43 16.93 68 26.77 93 36.61
19 7.48 44 17.32 69 27.17 94 37.01
20 7.87 45 17.72 70 27.56 95 37.40
21 8.27 46 18.11 71 27.95 96 37.80
22 8.66 47 18.50 72 28.35 97 38.19
23 9.06 48 18.90 73 28.74 98 38.58
24 9.45 49 19.29 74 29.13 99 38.98
25 9.84 50 19.69 75 29.53 100 39.37

Source: calculated with 1 in = 2.54 cm exactly.

105 to 200 cm in inches
cmincmincmincmin
105 41.34 130 51.18 155 61.02 180 70.87
110 43.31 135 53.15 160 62.99 185 72.83
115 45.28 140 55.12 165 64.96 190 74.80
120 47.24 145 57.09 170 66.93 195 76.77
125 49.21 150 59.06 175 68.90 200 78.74

Inches to centimeters chart

Multiplying by 2.54 never produces more than two decimal places for a whole number of inches, so these values are exact, not rounded.

1 to 24 inches in centimeters
incmincmincmincm
1 2.54 7 17.78 13 33.02 19 48.26
2 5.08 8 20.32 14 35.56 20 50.8
3 7.62 9 22.86 15 38.1 21 53.34
4 10.16 10 25.4 16 40.64 22 55.88
5 12.7 11 27.94 17 43.18 23 58.42
6 15.24 12 30.48 18 45.72 24 60.96

How tall is 5 feet 10 in cm?

Height is where most length conversions happen: passports and medical forms in one system, a dating profile or a US driver’s license in the other. 5 feet 10 inches is 177.8 cm. The first table runs from 5 feet to 6 feet 6 inches. To turn a height into a body mass index, put the metric value into our BMI calculator.

Feet and inches to centimeters
HeightInchescmMeters
5′ 0″ 60 152.4 1.52
5′ 1″ 61 154.9 1.55
5′ 2″ 62 157.5 1.57
5′ 3″ 63 160.0 1.60
5′ 4″ 64 162.6 1.63
5′ 5″ 65 165.1 1.65
5′ 6″ 66 167.6 1.68
5′ 7″ 67 170.2 1.70
5′ 8″ 68 172.7 1.73
5′ 9″ 69 175.3 1.75
5′ 10″ 70 177.8 1.78
5′ 11″ 71 180.3 1.80
6′ 0″ 72 182.9 1.83
6′ 1″ 73 185.4 1.85
6′ 2″ 74 188.0 1.88
6′ 3″ 75 190.5 1.91
6′ 4″ 76 193.0 1.93
6′ 5″ 77 195.6 1.96
6′ 6″ 78 198.1 1.98
Centimeters to feet and inches
cmFeet and inchesTotal inches
150 4 ft 11.1 in 59.1
155 5 ft 1.0 in 61.0
160 5 ft 3.0 in 63.0
165 5 ft 5.0 in 65.0
170 5 ft 6.9 in 66.9
175 5 ft 8.9 in 68.9
180 5 ft 10.9 in 70.9
185 6 ft 0.8 in 72.8
190 6 ft 2.8 in 74.8
195 6 ft 4.8 in 76.8
200 6 ft 6.7 in 78.7

Source: calculated with 1 in = 2.54 cm exactly; inches rounded to one decimal place.

How many kilometers are in a mile?

Race distances are set in kilometers even in the United States, which is why a marathon comes out at the awkward 26.22 miles. One kilometer is 0.621371 miles; one mile is 1.609344 kilometers.

Running distances
RaceKilometersMiles
5K 5 3.11
10K 10 6.21
Half marathon 21.0975 13.11
Marathon 42.195 26.22
100 km 100 62.14

Source: World Athletics distances; miles calculated with 1 mi = 1.609344 km.

The nautical mile is a different unit, used at sea and in aviation. At 1,852 meters it is about 15% longer than a land mile (1.15078 mi), and a knot is one nautical mile per hour.

Where the inch and meter come from

The meter was first set in France in the 1790s as one ten-millionth of the distance from the North Pole to the equator. In 1889 the first General Conference on Weights and Measures approved a platinum-iridium bar, the International Prototype of the Meter, as the standard. Since 1983 the meter has been defined by the speed of light: the distance light travels in a vacuum in 1/299,792,458 of a second.

The inch had a messier path. Until 1959 the American and British yards differed by a few parts per million, which mattered to engineers making precision parts. On July 1, 1959, the national standards laboratories of the United States, the United Kingdom, Canada, Australia, New Zealand and South Africa agreed on an international yard of exactly 0.9144 meters. Divide by 36 and the inch becomes exactly 2.54 cm.

The United States kept a second, older foot for land surveying, defined as 1,200/3,937 meters. NIST and NOAA retired that U.S. survey foot at the end of 2022, and from January 1, 2023, the international foot of 0.3048 meters applies to new work.

The nautical mile of 1,852 meters was adopted by the International Hydrographic Conference in Monaco in 1929. The United States switched to it on July 1, 1954, from its earlier figure of 6,080.20 feet.

Lengths also feed other conversions: multiply two lengths in feet for square feet in our area calculator, or switch to the weight converter and the temperature converter for the other everyday units.

Common mistakes

  • Reading 5.10 ft as 5 feet 10 inches. 5.10 ft is 5 feet 1.2 inches. Five feet ten is 5.83 ft, because a foot has 12 inches, not 10.
  • Rounding 2.54 to 2.5. The error is 1.6%, which is 2.8 cm on a 175 cm height and enough to change a clothing size.
  • Mixing up miles and nautical miles. A ship or plane speed in knots is about 15% faster in miles per hour.
  • Using the survey foot on new US maps. Old property records may still use it; the gap is about 3.2 mm per mile, small on a lot and large across a state grid.

Common questions

How many centimeters are in an inch?

Exactly 2.54. It has been a definition, not a measurement, since 1959.

How many inches is 100 cm?

39.3701 inches, or 3 feet 3.4 inches. A meter is slightly longer than a yard (36 inches).

How tall is 6 feet in cm?

6 feet is 72 inches, and 72 × 2.54 = 182.88 cm.

Why does this converter show only six digits?

Six significant digits is far more precise than any tape measure. Where the true answer is short and exact, such as 1 mile = 1.609344 km, the converter shows it in full.

Sources

Last reviewed November 9, 2026.