Skip to content

Bread hydration calculator

Dough hydration and baker’s percentages, including starter.

Mode
g
g
g
g
g
%
Flour type

Total hydration, starter counted

0%

Enter flour and water in grams.

IngredientWeighBaker’s %

Dough bowl showing the split of flour, water, starter and salt A mixing bowl filled left to right in the proportions of the dough by weight.
    Where the dough sits
    Hydration scale from 50 to 100 percent with bread styles Typical hydration range of seven bread styles, with a marker at the current dough. Bagels Neapolitan pizza Sandwich loaf Baguette Country sourdough Ciabatta Focaccia 50% 60% 70% 80% 90% 100%

    Runs in your browser; nothing you type is sent anywhere. Hydration ranges for bread styles and flours are our own rule-of-thumb guide: flours and kitchens differ.

    What is bread hydration, and how do you calculate it?

    Bread hydration is the weight of water divided by the weight of flour, times 100. A dough with 700 g of water and 1,000 g of flour is 70% hydrated. This bread hydration calculator does that sum for you and then does the part that trips people up: it counts the flour and water hiding inside a sourdough starter.

    The numbers on a recipe card follow baker’s percentages. Flour is always 100%, and every other ingredient is a percentage of the flour weight, so salt at 20 g on 1,000 g of flour is 2%. Because the base never changes, a formula scales to any batch size and two recipes compare at a glance.

    Formula

    Hydration (%) = total water ÷ total flour × 100

    Any ingredient’s baker’s % = its weight ÷ total flour × 100

    How does a sourdough starter change the hydration?

    It adds water and flour you did not weigh separately. A 100% hydration starter is half flour and half water, so 100 g of it contributes 50 g of each. King Arthur Baking counts a preferment’s flour and water toward the total in the same way, which is why the loaf below climbs from 72.2% on paper to 75.0% in the bowl.

    One loaf, two hydration numbers
    IngredientRecipe, starter ignoredInside the starterTrue total
    Flour you weigh 450 g 0 g 450 g
    Water you weigh 325 g 0 g 325 g
    Starter (100% hydration) 100 g +50 g flour, +50 g water –
    Total flour and water 450 g + 325 g 500 g + 375 g
    Hydration 72.2% 75.0%

    Source: calculator formula; method as described by King Arthur Baking

    A 100 g starter split into 50 g flour and 50 g water One bar for the starter, divided into equal flour and water halves, with an arrow to the dough totals. starter 100 g 50 g flour 50 g water goes into total flour goes into total water
    A stiffer starter at 50% hydration splits 100 g into 66.7 g flour and 33.3 g water. Enter its hydration in the calculator.

    Which hydration for which kind of bread?

    Most home sourdough sits between 70% and 80%. King Arthur calls doughs around 60% low hydration and those above about 80% high hydration, and notes that all-purpose doughs at 55% to 65% feel firm. The table is our own working guide built from common recipes; adjust it to your flour.

    Typical hydration by bread style
    BreadUsual range
    Bagels 50 to 57%
    Neapolitan pizza 58 to 65%
    Sandwich loaf 60 to 68%
    Baguette 65 to 72%
    Country sourdough 70 to 80%
    Ciabatta 78 to 90%
    Focaccia 80 to 95%

    Source: our own guide from common recipes; not a standard

    Why does whole wheat flour need more water?

    Bran and germ soak up water, and they do it slowly. King Arthur’s test bakers raised the water in a no-knead whole wheat loaf from 75% to around 85 to 90% for that reason, and suggest resting a 100% whole wheat dough about 30 minutes before kneading so the flour can finish drinking before you judge the texture. Hydration is calculated the same way for every flour; only how the dough feels at a given number changes.

    Starting hydration by flour
    FlourStarting rangeWhat to expect
    All-purpose 60 to 68% Softer dough, less water taken up
    Bread flour 65 to 75% Higher protein holds more water
    50% whole wheat blend 72 to 80% Bran drinks water slowly
    100% whole wheat 78 to 90% Rest 30 minutes before judging the dough
    Rye (high share) 75 to 90% Little gluten, so the dough is sticky by nature

    Source: our own guide; King Arthur Baking on whole grain absorption

    How do I turn percentages into grams for a set dough weight?

    Divide the dough weight by 1 plus the sum of the percentages (as decimals). With 1,000 g of dough, 75% hydration and 2% salt, total flour is 1,000 ÷ 1.77 = 565 g. The starter (20% of that flour) then comes out of the flour and the water, which is what the “Weigh it out” mode does.

    1,000 g of dough at 75% hydration, 20% starter, 2% salt
    IngredientWeighBaker’s %
    Flour 508 g 90.0%
    Water 367 g 65.0%
    Starter (100%) 113 g 20.0%
    Salt 11.3 g 2.0%
    Dough 1,000 g 177.0%

    Source: calculator; the starter supplies 56 g flour and 56 g water

    The same maths helps when you scale a recipe: the recipe scaler multiplies every amount, and the cups to grams converter gets a cup-measure recipe onto a scale first. Percent changes between two formulas are easy to check with the percentage calculator, and Celsius to Fahrenheit covers oven settings in recipes from other countries.

    What mistakes make the numbers wrong?

    • Ignoring the starter. A recipe that lists 400 g water on 500 g flour plus 100 g starter is closer to 70% than 80%.
    • Using total dough weight as the base. Baker’s percentages divide by flour only. Dividing by dough weight gives a number that cannot be compared with any other formula.
    • Forgetting add-ins. Seeds and dried fruit are a percentage of flour like everything else, and soaked seeds carry their own water.
    • Copying a number between flours. A 78% whole wheat dough is stiffer than a 78% bread flour dough.
    • Chasing the number. Humidity, flour age and how long the dough rested all move how wet a dough feels. Use the percentage to record and repeat, and the dough itself to decide.

    Sources

    Checked November 17, 2026. Style and flour ranges, and the 2% salt figure used in the examples, are common baking practice and our own guide rather than a published standard.